Admin Passwort - Reset mit einem Cross-Over-Kabel
Knowledge Base Home | Submit a new ticket
Helmich Support Wissensdatenbank

Admin Passwort - Reset mit einem Cross-Over-Kabel

Article Id: #18     Viewed: 4614 times     Last updated on: 11 Feb 2015     Article Category: Ironport Wissensdatenbank    

Um das Admin Passwort zu resetten benötigt man einerseits die S/N der betroffenen Appliance, und zum anderen ein Crossover-Kabel.

Nun fragt man beim Cisco Support das Master Passwort für die Appliance an (mit der S/N), um das Passwort zu resetten.

Im Anschluss befolgt man folgende Schritte:

"Kindly note that Admin Password Rest procedure require a physical access to the serial port of the appliance.
So, you require a DB9 female to DB9 female crossover cable to connect your computer to the appliance serial port and a matching terminal software (e.g. PuTTY) to access the serial port.

The following settings are required on the terminal software:

Bits per second: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: Hardware

Login user for password reset is : adminpassword.

Once login to the appliance you can use the following Master password to reset the old one and enter your new password."

Was this information useful?
Yes     No
Helmich IT-Security GmbH